Glossary entry (derived from question below)
English term or phrase:
part molded to shape
Italian translation:
pezzo stampato a geometria
Added to glossary by
martini
Oct 14, 2018 16:01
5 yrs ago
1 viewer *
English term
Part molded to Shape
English to Italian
Tech/Engineering
Automation & Robotics
Non c'è contesto, solo una serie di fasi consecutive per la produzione di questa "part". Non mi viene una resa elegante per "molded to shape"
Mold Part
Load Resin
Load Blowing Agent and Colorant
Mold Carrier
Quality Auditor Check Part
Record Part Dimensions
Meet Target?
Part molded to Shape
Mold Part
Load Resin
Load Blowing Agent and Colorant
Mold Carrier
Quality Auditor Check Part
Record Part Dimensions
Meet Target?
Part molded to Shape
Proposed translations
(Italian)
4 | pezzo stampato a geometria | martini |
4 | parte modellata/sagomata | Gaetano Silvestri Campagnano |
Change log
Oct 24, 2018 12:36: martini Created KOG entry
Proposed translations
15 hrs
Selected
pezzo stampato a geometria
conformemente a una sagoma / stampo
Can be molded to shape to avoid the problems associated with secondary metallic tooling, such as part mark-off and complex shape requirements.
https://www.airtech.lu/en/Airpad-Rubber-Tooling
Può essere stampata a geometria evitando i problemi associati ad un controstampo metallico, come le marcature e la gestione di geometrie complesse.
https://www.airtech.lu/it/node/570
Lo stampo si chiude e la plastica fusa
viene iniettata nella cavità affinché si conformi alla sagoma.
È in questo momento che la massa fusa ingloba la pellicola
rendendola parte integrante del pezzo stampato.
The mold closes and the molten plastic is then injected into the mold where
it conforms to the shape of the object. It is in this precise
moment that the melted plastic envelops the label and makes
it an integral part of the object.
http://www.mori2a.com/wp-content/uploads/2014/06/Introduzion...
Can be molded to shape to avoid the problems associated with secondary metallic tooling, such as part mark-off and complex shape requirements.
https://www.airtech.lu/en/Airpad-Rubber-Tooling
Può essere stampata a geometria evitando i problemi associati ad un controstampo metallico, come le marcature e la gestione di geometrie complesse.
https://www.airtech.lu/it/node/570
Lo stampo si chiude e la plastica fusa
viene iniettata nella cavità affinché si conformi alla sagoma.
È in questo momento che la massa fusa ingloba la pellicola
rendendola parte integrante del pezzo stampato.
The mold closes and the molten plastic is then injected into the mold where
it conforms to the shape of the object. It is in this precise
moment that the melted plastic envelops the label and makes
it an integral part of the object.
http://www.mori2a.com/wp-content/uploads/2014/06/Introduzion...
4 KudoZ points awarded for this answer.
14 mins
parte modellata/sagomata
.
Something went wrong...